We use cookies to provide social media features and to analyse our traffic. See more about our use of cookies.

A temporary dispensation has been applied to the assessment plan version ST0068/AP02 for this apprenticeship. The dispensation will last until the revised EPA plan is published or the dispensation is no longer necessary.

End-point assessment organisations (EPAOs) delivering EPAs for the apprenticeship will implement the dispensation as required, supported and monitored by the relevant EQA provider. 

The key changes are: 

Assessment Method  – MCQ exam engineering

  • The ‘hurdle’ section of this exam will be 3 out of 5 questions answered correctly.

  • An additional attempt at this exam will be permitted if 3 attempts have been taken prior to the dispensation being awarded.

The ‘hurdle’ questions will continue to represent 25% of the exam marks available.  The overall pass mark remains the same at 80%.

 

This apprenticeship standard is in the process of being revised. In the meantime, the version below remains approved for delivery. Further details of this and other occupational standards in revision are available in the revisions status report.

Overview of the role

Inspecting and repairing a range of heavy vehicles (HVs) and trailers for dealerships, independent garages and franchise and large fleet operators.

Heavy vehicle service and maintenance technician

Reference Number: ST0068

Details of standard

Overview of the Role:

A Heavy Vehicle (HV) technician services, inspects and repairs HVs, categorised by the Department

of Transport as category N2 or N3, and associated trailers, with the associated ancillaries. They work in either a dealership that focusses on a particular manufacturer, or for an independent garage, franchise or large fleet operator that deals with many different makes of vehicles. They work on all the systems found within the vehicle. The nature of the work ranges from replacing simple parts through to solving complex faults with the use of diagnostic methods and equipment. The day-to-day tasks faced by the technician are constantly changing, driven by the introduction of ever more complex technologies and diagnostic techniques. Today’s technician has to demonstrate expertise in the technical side of their role. They must have strong problem-solving skills and a good grasp of the theoretical and practical aspects of vehicles systems and associated ancillaries. They must be able to work independently but also operate as an effective team member, understanding how their workshop and the dealership/garage/branch functions from a commercial perspective, have good customer handling skills and identify ways in which they can work more efficiently. The growing complexity of today’s vehicles and the pressure to deliver a high-quality customer experience requires the retail automotive sector to attract and train high calibre individuals and this is reflected in the elements of the Standard described below.

Programme Duration:

Typically it is expected that it will take three years for the apprentice to attain the required level of competence in the workplace although it may be sooner if an individual already has significant training and practical experience.

Entry Requirements:

Individual employers will set their own selection criteria for the applicants. It is however recommended that to optimise the chance of selection,  candidates can demonstrate an interest in how the HV industry operates as well as ability to work in an organised and methodical way to analyse and solve problems; be able to demonstrate mechanical skills; also demonstrate an ability to communicate both orally and in writing.  Apprentices without level 2 English and maths will need to achieve this level prior to completion of their apprenticeship.

A heavy vehicle service and maintenance technician will demonstrate a knowledge and understanding of the following:

  • The fundamentals of HV technologies e.g. HV chassis design, engine, fuels, transmissions, electrical (12/24v), air-conditioning, hydraulic and air braking, air suspension systems etc.
  • The types and associated characteristics of HV and their configurations and applications.
  • Diagnosing principles and logical problem solving techniques related to HV.
  • Sufficient H&S knowledge and environmental awareness to carry out the work safely.
  • Operators “O” Licence requirements relating to HVs.
  • How to service, inspect and maintain vehicles and trailers to the expected standards and the importance of safety inspection and maintenance schedules to meet Operator’s (O) licence and legal obligations.
  • Customer expectations and implications of work carried out.
  • The need to be reliable, flexible, diligent and good timekeeper.
  • How the business works from an operational perspective and demonstrate commercial and financial awareness in the HV industry.
  • Complex problem solving techniques.
  • The requirements of providing roadside assistance.

The competency to achieve the following skills in the workplace:

  • Carry out the basic tasks with tools and equipment common to all procedures involving basic mechanical and electrical procedures related to HV.
  • The ability to keep updated with emerging new technologies within the HV industry.
  • Contribute to the maintenance of a safe and efficient workshop and adhere to the company and legislative processes.
  • Access specific and related HV technical information appropriately.
  • The ability to service, inspect and maintain HVs and trailers to meet company, Driver and vehicle standards agency (DVSA) and manufacturers’ standards.
  • Use a range of diagnostic and electrical measuring equipment to identify faults and underlying causes on HV’s.
  • Successfully inspect and prepare vehicles and trailers to meet DVSA standards prescribed in the tester’s manual.
  • Carry out final quality checks before handover to the customer without supervision.
  • Apply advanced diagnostic principles and logical/problem solving techniques and regimes.
  • Maintain records to company and operators’ licence obligations and regulation.
  • To be able to communicate effectively in both oral and written mediums both internally and with customers on a range of topics that will support, HV inspection and diagnosing techniques.

Required behaviours to achieve the following in the workplace:

  • Behave in accordance with the values of the company they work for whether manufacturer or independent to treat customers and stakeholders with courtesy and respond quickly to their requirements to ensure an excellent experience.
  • Operate effectively as a team member taking ownership and responsibility when required and be honest and accountable in all activities when things do not go as planned.
  • To work at continuous development of both self, team and processes.

Progression, Qualification and Professional Body:

This standard has been designed to meet the professional standards of the relevant professional bodies of the Engineering Council for initial registration as an Engineering Technician (Eng. Tech).

On completion of the standard the Engineering Technician will be eligible to apply for registration as an Engineering Technician with a relevant professional body. On completion and achievement of the standard, candidates will have the opportunity to progress to Master Technician, management or to develop in their current role.

Standard Review

The apprenticeship should be reviewed after a maximum of 3 years

This apprenticeship is set at level 3


Crown copyright © 2024. You may re-use this information (not including logos) free of charge in any format or medium, under the terms of the Open Government Licence. Visit www.nationalarchives.gov.uk/doc/open-government-licence

Status: Approved for delivery
Level: 3
Reference: ST0068
Version: 1.2
Date updated: 01/09/2022
Approved for delivery: 7 September 2016
Route: Engineering and manufacturing
Typical duration to gateway : 36 months (this does not include EPA period)
Maximum funding: £15000
LARS Code: 135
EQA Provider: Ofqual

Find an apprenticeship

Contact us about this apprenticeship

Employers involved in creating the standard: Arriva Plc, ISUZU Truck (UK) Limited, Iveco Ltd, London General Services Ltd, MAN Truck and Bus Ltd, Mercedes-Benz UK Ltd, Nottingham City Transport Ltd, Renault Trucks UK Limited, SCANIA (Great Britain) Ltd, Stagecoach Group PLC, Volvo Group UK Limited, People 1st

Version log

Version Change detail Earliest start date Latest start date Latest end date
1.2 End-point assessment plan revised 22/08/2022 Not set Not set
1.1 The funding band for this standard has been reviewed as part of the apprenticeship funding band review. The new funding band is £15000 01/07/2019 21/08/2022 Not set
1.0 Retired 07/09/2016 30/06/2019 Not set

Is this page useful?

Tell us about your visit

Help us improve our website